Prices
Flat-rate tune-ups, one hourly rate for repairs, and published trip fees. Prices are the same whether you book online or by text.
Flat-rate tune-ups
No hourly minimum on tune-ups. The price below is the price, standard parts included.
| Service | Price |
|---|---|
| Snowblower tune-up, single-stage Shear pins, auger and impeller visually checked · Auger and drive belts visually checked · Grease chain and gears · Clean friction disc | $185 |
| Snowblower tune-up, two-stage or three-stage Same maintenance checklist on a bigger machine | $205 |
| Push mower tune-up +$15 for a 2nd blade · Blade sharpened + balanced · Deck scraped/cleaned · Drive belt visually checked (if equipped) | $125 |
| Self-propelled mower tune-up +$15 for a 2nd blade · everything in the push-mower list plus drive belt visually checked | $140 |
| Riding mower / lawn tractor tune-up (up to 2 blades) +$15 for a 3rd blade · Blades sharpened + balanced · Deck cleaned and leveled · Drive and deck belts visually checked · Nuts and bolts tightened | $250 |
| Zero-turn tune-up (up to 2 blades) +$15 for a 3rd blade · everything in the rider list plus pump and drive belts visually checked | $275 |
| Generator service (portable or inverter) Old fuel drained from carb bowl · Fuel line and shutoff checked · Spark arrester cleaned · Storage or storm-ready advice | $150 |
Note: Carburetor cleaning, electrical, battery, charging and output testing are repair work, billed as parts plus labor ($85/hr) with your OK first.
Anything beyond the tune-up list (carb cleaning, fuel filters, belt replacement, shear pins, batteries, new blades, carb kits, electrical/output testing, repairs) is parts plus $85/hr, and we ask before doing it.
Repairs and diagnosis
| Labor rate | $85/hr |
| Repair / diagnostic visit (2-hour minimum) Diagnosis plus the first 2 hours of repair work for one machine. Free-zone travel is included. After that, billed in half-hour increments ($42.50). | $170 |
| More machines on the same visit Half-hour increments, no second minimum | $85/hr |
| Extra work found during a tune-up Half-hour increments, no minimum since we are already there. We ask first. | $85/hr + parts |
| Carburetor clean (ultrasonic), beyond the tune-up Plus parts if it needs a kit or a new carb | $85 |
| Blade sharpen and balance, stand-alone Already included in every mower tune-up | $15/blade |
Parts are always extra on repairs. If a part isn't on the truck, we order it. A return trip for parts inside the free zone has no second trip fee; elsewhere the zone fee applies again.
Deposit, cancellation and payment
- $35 deposit on every booking — including free-zone towns like Powell and Cody — credited to your final bill (not an extra fee).
- Cancel or reschedule free up to 24 hours before your window. Later than that, or a no-show, and the deposit is kept.
- Pay on completion by card, cash or check. You get an itemized invoice.
- No rush or same-day service for now. Most visits land within the week.
Trip fees by zone
| Zone | Towns | About from Powell | Trip fee | Schedule |
|---|---|---|---|---|
| Free zone | Powell, Cody, Lovell, Cowley, Garland, Ralston, Byron, Deaver and Frannie | home base to ~24 mi / ~30 min | $0 | Any Tue–Fri window |
| Wapiti | Wapiti | 45 mi / ~1 hr via Cody | $75 $50 each when 2+ book the same day | Paired with Cody days |
| Meeteetse | Meeteetse | 53 mi / ~1 hr | $75 $50 each when 2+ book the same day | Paired with Cody days |
| Montana route | Laurel, MT | 82 mi / ~1 hr 40 min | $0 on route days outside a route day $100; $35 deposit on route days | Montana route day (every other week; weekly in peak season); goes when 4+ stops are booked |
| Montana route | Billings, MT | 98 mi / ~2 hr | $0 on route days outside a route day $100; $35 deposit on route days | Montana route day (every other week; weekly in peak season); goes when 4+ stops are booked |
| Worland (farthest point served) | Worland, WY | 93 mi / ~2 hr | $130/stop flat fee, one job or several | Worland day (first Thursday of each month) |
- One trip fee per address covers every machine there.
- Every booking takes a deposit that is credited to your final bill — it is not an extra fee. In the free zone and on Montana route days that deposit is $35. For Wapiti, Meeteetse and Worland, the amount collected up front equals the trip fee and is still credited to the bill.
- Montana route days (when 4+ stops are booked) have no trip fee for Laurel or Billings. Outside a route day the trip fee is $100 for either town.
- Worland is a flat $130 per stop on the first Thursday of each month, whether it's one job or several.
Worland is the farthest point served. Not sure which zone you're in? Check the service area or text (307) 254-9714.
What we don't work on
- EFI (fuel-injected) engines (no scan tools yet)
- Diesel engines
- Outboard/marine engines
- Large commercial or ag equipment
- ATVs/UTVs (for now)
- Standby generator transfer-switch electrical work (licensed electrician)
- ASAP / same-day rush calls (not offered for now)
Fuel-injected (EFI) engines are off the list for now because they need dealer scan tools. If you're not sure what your machine has, send a photo of the engine tag or call or text (307) 254-9714.
Service details: snowblowers · lawn mowers · generators